LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 259 (Noise, Vibration And Harshness -- XE/(760)) >> Noise, Vibration And Harshness (G61157) >> Diagnosis And Testing >> Noise, Vibration And Harshness (G1058328) >> Pinpoint Tests >> Pinpoint Test E: Non-Axle Noise

Pinpoint Test E: Non-Axle Noise

WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. E1: INSPECT VEHICLE TRIM 
    1. Check the grille and trim mouldings to see if they are the source of the noise.

      Are the vehicle trim components causing the noise?

      Yes 

      Install new trim or repair as necessary. Refer to appropriate service information.

      No 

      GO to  E2.

  2. E2: CHECK THE A/C SYSTEM FOR NOISE 
    1. Check the A/C system components for noise by turning the A/C system on and off.

      Is the A/C system causing the noise?

      Yes 

      Diagnose the A/C system. REFER to: LIFTING

      No 

      GO to  E3.

  3. E3: CHECK NON-FACTORY ACCESSORIES 
    1. Inspect any accessories for being the source of the noise. Example: grounding body-to-frame, antennas, visors, bug deflectors and fog lights?

      Are the accessories the cause of the noise?

      Yes 

      Adjust, repair or install new accessories or fasteners as required.

      No 

      Verify the customer concern.

scientia non olet · About LEMON Manuals