LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 258 (Anti-Lock Control - Stability Assist -- XE/(760)) >> Anti-Lock Control - Stability Assist (G1817290) >> Removal And Installation >> Front Wheel Speed Sensor (G1817292) >> Installation

Front Wheel Speed Sensor (G1817292): Installation

WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. CAUTION: Make sure the mating surfaces are clean and free from foreign material.
    • Install the front wheel speed sensor.
    • Install and tighten the bolt.

    Torque  : 9Nm 

    • Install the front wheel speed sensor to the 2 grommets.
    • Install the front wheel speed sensor wiring harness to the clip.
    • Connect the electrical connector to front wheel speed sensor.
  3. Install the front wheel arch liner.

    Refer to: FRONT WHEEL ARCH LINER

scientia non olet · About LEMON Manuals