LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 258 (Anti-Lock Control - Stability Assist -- XE/(760)) >> Anti-Lock Control - Stability Assist (G1817290) >> Removal And Installation >> Accelerometer (G2250352) >> Installation

Accelerometer (G2250352): Installation

WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the Restraints Control Module (RCM) and 3 nuts.

    Torque  : 11Nm 

  2. Connect the 2 electrical connectors to the RCM.
  3. Install the floor console.

    Refer to the appropriate repair information

  4. Connect the startup battery ground cable.

    Refer to: STARTUP BATTERY DISCONNECT AND CONNECT

scientia non olet · About LEMON Manuals