Special Tool(S)

WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

JLR-CF54

Jaguar Land Rover (JLR) approved diagnostic equipment

Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

BSU2

JLR approved battery support unit

Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

JLR-IDU2

IDU 2 Kit

Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

IDUO6

Petrol Compression Test Cable

Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

IDUO6C

Diesel Compression Test Cable

NOTE: The Jaguar Land Rover (JLR) approved diagnostic equipment will read the Vehicle Identification Number (VIN) for the vehicle.

Connect the Jaguar Land Rover (JLR) approved battery support unit.
Connect the JLR approved diagnostic equipment to the vehicle and begin a new session.
Follow the JLR approved diagnostic equipment prompts.
1. Select the 'Diagnosis' Session Type.
2. Select any of the following symptoms:
  1. Powertrain-Engine System-Engine Performance
  2. Powertrain-Engine System-Starting System
  3. Electrical-Instruments-Warning Lamps-Engine Malfunction Lamp
3. Run Inline diagnostic unit 2, relative compression test - XXXX
4. When all of the tasks are complete, exit the session.
Disconnect the JLR approved diagnostic equipment and the JLR approved battery support unit.