Brake Vacuum Pump - V8 S/C 5.0L Petrol, Project 8 (G2249549): Installation

WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.

Install a new vacuum pump seal.
Renew Part: Brake vacuum pump seal Quantity: 1.
- Install the brake vacuum pump.
- Install and tighten the 2 M6 x 65 mm bolts.
  Torque : 12Nm
- Connect the vacuum hose.
Install the undershield.
Refer to: ENGINE UNDERSHIELD - PROJECT 8
Fill the engine with oil.
Refer to: ENGINE OIL VACUUM DRAINING AND FILLING
Start engine and check the brake booster operation.