Brake Vacuum Pump - V6 S/C 3.0L Petrol (G1851893): Removal
WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Removal steps in this procedure may contain installation details.
-
WARNING: Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
- Refer to: ENGINE UNDERSHIELD - PROJECT 8
- Refer to: ENGINE OIL VACUUM DRAINING AND FILLING
-
CAUTION: Before disconnecting any components, make sure the area is clean and free from foreign material. When disconnected all openings must be sealed.
-
CAUTION: Be prepared to collect escaping oil.
Torque : 12Nm
Renew Part: Brake vacuum pump seal Quantity: 1.