Coolant Pump (G2244107): Installation
WARNING: This page is about a different car, the 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
- Install the coolant pump and bolt.
Torque : 9Nm
- Connect the 2 coolant hoses.
- Connect the electrical connector and install the 2 clips.
- Install the left air filter housing.
Refer to: LEFT AIR FILTER HOUSING
- Install the air filter outlet pipe T-connector.
Refer to: AIR FILTER OUTLET PIPE T-CONNECTOR
- Vacuum fill the cooling system.
- Connect the startup battery ground cable.
Refer to: STARTUP BATTERY DISCONNECT AND CONNECT .