LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 253 (Engine - V8 S/C 5.0L Petrol -- XE/(760)) >> Engine - V8 S/C 5.0L Petrol, Project 8 (G2261898) >> Removal And Installation >> Right Engine Mount (G2244078) >> Installation

Right Engine Mount (G2244078): Installation

WARNING: This page is about a different car, the 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the right engine mount.
  2. CAUTION: Make sure the engine mount is correctly installed in position.

    Using the hydraulic jack, lower the engine.

    General Equipment  : Transmission jack 

  3. Remove the hydraulic jack.
  4. Install the front lower wheel arch liner.
  5. Install the 2 engine mount bolts finger tight at this stage.
  6. Install the engine mount nut finger tight at this stage.
  7. Fully tighten the 2 engine mount bolts.

    Torque  : 60Nm 

  8. Fully tighten the right engine mount nut.

    Torque  : 60Nm 

  9. Install and tighten the left engine mount nut.

    Torque  : 60Nm 

  10. Install the engine undershield.

    Refer to: ENGINE UNDERSHIELD - PROJECT 8 .

  11. Install the transmission undershield.

    Refer to: TRANSMISSION UNDERSHIELD - PROJECT 8 .

scientia non olet · About LEMON Manuals