LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 253 (Engine - V8 S/C 5.0L Petrol -- XE/(760)) >> Engine - V8 S/C 5.0L Petrol, Project 8 (G2261898) >> Removal And Installation >> Crankshaft Front Seal (G2244071) >> Removal

Crankshaft Front Seal (G2244071): Removal

WARNING: This page is about a different car, the 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • This procedure contains illustrations showing certain components removed to provide extra clarity.
  • This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.
  1. Disconnect the startup battery ground cable.

    Refer to: BATTERY .

  2. Remove the crankshaft pulley.

    Refer to: CRANKSHAFT PULLEY .

  3. G11284907Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Using the special tool, remove the front crankshaft oil seal as illustrated.

    Special Tool(s)  : 303-1434 

scientia non olet · About LEMON Manuals