Torque Specifications
WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATION
| DESCRIPTION | NM | LB-FT | ||||
|---|---|---|---|---|---|---|
| Halfshaft outer constant velocity joint retaining nut (1) (Refer to removal and installation procedure for full tightening sequence) | Stage 1 - 80, Stage 2 - 60 degrees | Stage 1 - 59, Stage 2 - 60 degrees | ||||
| Lower arm to wheel knuckle retaining nut and bolt (2) | Stage 1 - 110, Stage 2 - 60 degrees | Stage 1 - 81, Stage 2 - 60 degrees | ||||
| Lower arm to subframe retaining nut and bolt (2) | Stage 1 - 110, Stage 2 - 300 degrees | Stage 1 - 81, Stage 2 - 300 degrees | ||||
| Upper arm to wheel knuckle retaining nut and bolt (2) | Stage 1 - 60, Stage 2 - 60 degrees | Stage 1 - 44, Stage 2 - 60 degrees | ||||
| Upper arm to subframe retaining nut and bolt (2) | Stage 1 - 60, Stage 2 - 60 degrees | Stage 1 - 44, Stage 2 - 60 degrees | ||||
| Toe link to subframe retaining nut and bolt (2) | Stage 1 - 60, Stage 2 - 90 degrees | Stage 1 - 44, Stage 2 - 90 degrees | ||||
| Toe link to wheel knuckle retaining nut and bolt (2) | Stage 1 - 60, Stage 2 - 60 degrees | Stage 1 - 44, Stage 2 - 60 degrees | ||||
| Integral link to knuckle nut and bolt (2) | Stage 1 - 40, Stage 2 - 60 degrees | Stage 1 - 35, Stage 2 - 60 degrees | ||||
| Integral link to lower arm nut and bolt (2) | Stage 1 - 40, Stage 2 - 60 degrees | Stage 1 - 35, Stage 2 - 60 degrees | ||||
| Shock absorber upper mounting to body retaining nuts (1) | Stage 1 - 48 Nm, Stage 2 60 degrees | Stage 1 - 35, Stage 2 60 degrees | ||||
| Shock absorber upper mounting retaining nut (without adaptive damping) (1) | 40 | 30 | ||||
| Shock absorber upper mounting retaining nut (with adaptive damping) (1) | 27 | 20 | ||||
| Shock absorber to lower arm retaining nut and bolt (2) | Stage 1 - 70 Nm, Stage 2 120 degrees | Stage 1 - 52, Stage 2 120 degrees | ||||
| Stabilizer bar link to stabilizer bar retaining nut (1) | 60 | 44 | ||||
| Stabilizer bar link to lower arm retaining nut (1) | 60 | 44 | ||||
| Stabilizer bar clamp to subframe retaining bolt | 60 | 44 | ||||
| Wheel and tire to wheel hub retaining nuts | Stage 1 - 4, Stage 2 - 70, Stage 3 - 125 | Stage 1 - 3, Stage 2 - 52, Stage 3 - 92 | ||||
** Discard the bolt.
|
||||||