LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 251 (Rear Suspension -- XE/(760)) >> Rear Suspension (G1856597) >> Removal And Installation >> Rear Stabilizer Bar Bush (G1917532) >> Installation

Rear Stabilizer Bar Bush (G1917532): Installation

WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. CAUTION: Make sure that the mating face is clean and free of foreign material.

    Install the stabilizer bar bush.

    • Install the rear stabilizer bar brackets.
    • Install and tighten the 2 new bolts.

      Renew Part: Rear stabilizer bar to subframe bolts Quantity: 4  .

      Torque  : 60Nm 

  3. Install the rear shock absorber.

    Refer to: REAR SHOCK ABSORBER 

  4. Repeat the procedure for the other side of the vehicle.
scientia non olet · About LEMON Manuals