Rear Stabilizer Bar (G1818217): Installation

WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.

- Install the rear stabilizer bar bushes.
- Install the rear stabilizer bar brackets.
- Install the rear stabilizer bar to the rear subframe.
- Install and tighten 4 new rear stabilizer bar bracket bolts.
  Renew Part: Rear stabilizer bar to subframe bolts Quantity: 4 .
  
  Torque : 60Nm
- Install and tighten 2 new rear stabilizer bar link nuts.
  Renew Part: Stabilizer bar link upper nut Quantity: 2 .
  
  Torque : 48Nm
Install the rear subframe.
Refer to: REAR SUBFRAME - PROJECT 8