DTC B100E-64: Video Input "A" - Signal plausibility failure: Action
WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
This DTC may be stored even though no fault condition is present and should be ignored unless the customer has reported an infotainment system concern. If the customer has reported an touchscreen problem within the instrument cluster audio widget or navigation map display, clear the DTC and retest. Verify the customer concern prior to diagnosis
- Using the Jaguar Land Rover approved diagnostic equipment, clear the DTCs and retest. If the fault persists, refer to the electrical circuit diagrams and check the APIX2 circuit for open circuit. Repair circuit as required, clear DTC and retest
- Using the Jaguar Land Rover approved diagnostic equipment, check the infotainment master controller for related DTCs and refer to the relevant DTC index