DTC U1014-31: APIX Display Link - User Interface Panel - Link #2 - No signal: Action
WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
- Using the Jaguar Land Rover approved diagnostic equipment, update the infotainment master controller/slave controller (where fitted) with the latest level software. Clear the DTCs and retest
- If the fault persists, do not replace the infotainment master controller/slave controller (where fitted). Contact the Jaguar Land Rover service desk for further assistance