LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 240 (Safety Belt System -- XE/(760)) >> SEATBELT System (G1923335) >> Diagnosis And Testing >> SEATBELT System (G1823151) >> Safety Information

Safety Information

WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
  • To avoid accidental deployment the back-up power supply must be depleted before beginning any work on the Supplementary Restraint System (SRS) or its components. Failure to follow this instruction may result in personal injury.
  • Do not use a multimeter to probe an SRS  module. It is possible for the power from the multimeter battery to trigger the activation of the module. Failure to follow this instruction may result in personal injury.
NOTE: Do not use a mobile phone or have a mobile phone in close proximity when working on the SRS  or components.

Power supply depletion 

Before beginning any work on the SRS  or related components:

  1. Remove the ignition key
  2. Disconnect the battery leads, ground first
  3. Wait one minute for the power circuit to discharge

There are comprehensive instructions on the correct procedures for SRS  repairs, refer to the relevant article of the repair information

scientia non olet · About LEMON Manuals