LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 240 (Safety Belt System -- XE/(760)) >> SEATBELT System (G1923335) >> Diagnosis And Testing >> SEATBELT System (G1823151) >> Diagnostic Guide Inertia Reel SEATBELTS >> Pinpoint Test I: SEATBELT Slow Retraction

Pinpoint Test I: SEATBELT Slow Retraction

WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. I1: D-LOOP CONTAMINATION CHECK/CLEAN 
    NOTE: Part shown removed for clarity. Seatbelt D-Loop can be visually inspected without removing the 'B' pillar trim panel.
    1. Visually inspect the front seatbelt D-Loop for a build up of dirt or contamination
    G14011806Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Does the front seatbelt D-Loop have a build up of dirt or contamination?

    Yes 

    Clean the seatbelt webbing and seatbelt D-loop to remove any dirt or foreign material using warm water

    CAUTION: Do not use any detergents or allow the water to stain the interior trim or enter the seatbelt retractor system

    No 

    Not the cause of the customers concern, continue diagnostics and follow the symptom chart for the reported failure