Pinpoint Test E: Interference-Webbing Routing
WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
- E1: INTERFERENCE-WEBBING ROUTING
- Refer to the appropriate repair information, remove any trim panels required to expose the D loop (anchor point)
- Remove obstructions and foreign objects, make sure the webbing does not catch or rub
- Confirm the seatbelt does not contact the wiring harness
- Check for correct operation twice
Does the webbing move freely then retract correctly?
Yes
Refer to the appropriate repair information, reinstall any trim panels, make sure there are no obstructions and the webbing does not catch or rub. No further action required
No
GO to PINPOINT TEST F .