LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 238 (Engine Cooling - INGENIUM I4 2.0L Petrol -- XE/(760)) >> Engine Cooling - INGENIUM I4 2.0L Petrol (G2006213) >> Removal And Installation >> Radiator (G1998227) >> Installation

Radiator (G1998227): Installation

WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the radiator.
  2. Install the radiator upper mountings.

    Torque  : 5Nm 

    • Install the 2 radiator mounting brackets.
    • Install and tighten the 4 bolts.

    Torque  : 7Nm 

  4. Install the coolant hoses.
  5. Install the cooling fan motor and shroud.

    Refer to: ELECTRIC COOLING FAN AND SHROUD

  6. Connect the battery ground cable.

    Refer to: STARTUP BATTERY DISCONNECT AND CONNECT

scientia non olet · About LEMON Manuals