Rear HALFSHAFT - Project 8 (G2258095): Part(S)
WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
| STEP | PART NAME | QUANTITY |
|---|---|---|
| Installation Step 1 | Circlip | 1 |
| Installation Step 3 | Lower control arm nut and bolt | 1 |
| Installation Step 4 | Rear halfshaft nut | 1 |
| Installation Step 5 | Tie-rod nut and bolt | 1 |
| Installation Step 6 | Upper control arm retaining nut and bolt | 1 |
| Installation Step 6 | Integral link nuts and bolts | 1 |
| Installation Step 7 | Stabilizer bar link lower nut | 1 |
| Installation Step 15 | Rear halfshaft nut | 1 |