LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 227 (Starting System - INGENIUM I4 2.0L Petrol -- XE/(760)) >> Starting System - INGENIUM I4 2.0L Petrol (G2006460) >> Removal And Installation >> Starter Motor (G1998287) >> Installation

Starter Motor (G1998287): Installation

WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the starter motor.

    Torque  : 48Nm 

  2. Connect the wiring harness.

    Torque  : 7Nm 

    1. Connect the startup battery positive cable.

      Torque  : 12Nm 

    2. Secure the cover.
  4. Install the catalytic converter.

    Refer to: CATALYTIC CONVERTER - VEHICLES WITH: NAS SPECIFICATION

  5. Connect the startup battery ground cable.

    Refer to: STARTUP BATTERY DISCONNECT AND CONNECT

scientia non olet · About LEMON Manuals