LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 226 (Starting System - V6 S/C 3.0L Petrol -- XE/(760)) >> Starting System - V6 S/C 3.0L Petrol (G1823527) >> Removal And Installation >> Starter Motor (G1821366) >> Installation

Starter Motor (G1821366): Installation

WARNING: This page is about a different car, the 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the starter motor.

    Torque  : 48Nm 

  2. Install the lower starter motor bolt.

    Torque  : 48Nm 

  3. Install the heatshield.

    Torque  : 6Nm 

  4. Connect the electrical connector.

    Torque  : 7Nm 

  5. Connect the electrical connector.

    Torque  : 12Nm 

  6. Secure the clips.
  7. Install the right catalytic converter.

    Refer to: RIGHT CATALYTIC CONVERTER - RWD

  8. Install the undershield.

    Refer to: ENGINE UNDERSHIELD

  9. Connect the startup battery ground cable.

    Refer to: STARTUP BATTERY DISCONNECT AND CONNECT

scientia non olet · About LEMON Manuals