Transmission To Power Transfer Unit Connecting Sleeve Seal (G1917364): Installation
WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
Using the special tool, install a new input shaft seal.
Special Tool(s): 307-520 , JLR-307-694
-
NOTE: If equipped.
A new breather vent must always be installed.
Renew Part: Breather Quantity : 1.
- Install the transfer case assembly.
Refer to: TRANSFER CASE