LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 224 (Transfer Case Vehicles With: 8HP45 8 - Speed Automatic Transmission AWD/8HP70 8 - Speed Automatic Transmission AWD -- XE/(760)) >> Transfer Case - Vehicles With: 8HP45 8-Speed Automatic Transmission AWD/8HP70 8-Speed Automatic Transmission AWD (G1904671) >> Removal And Installation >> Transfer Case Bush (G1895648) >> Installation

Transfer Case Bush (G1895648): Installation

WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. CAUTION: Make sure the special tool is installed to the bush in the correct orientation.
    G11314305Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Special Tool(s): JLR-307-698 

    Renew Part: Transfer case bush Quantity  : 1. 

  2. NOTE: To aid installation, lubricate the bush with soapy water.
    G11314306Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Using the special tools, install the transfer case bush half way into the transfer case and wait for 2 minutes.

    Special Tool(s): JLR-307-698 

  3. G11314307Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Fully install the transfer case bush into the transfer case and wait for 2 minutes.

    Special Tool(s): JLR-307-698 

  4. G11314308Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Release the special tools and wait for 2 minutes. Check that the bush is evenly installed with no more than a 1mm gap between the faces of the bush and the transfer case. If the gap is more than 1mm repeat installation step  3 .

    Special Tool(s): JLR-307-698 

  5. Install the transfer case.

    Refer to: TRANSFER CASE 

  6. Connect the battery ground cable.

    Refer to: STARTUP BATTERY DISCONNECT AND CONNECT

scientia non olet · About LEMON Manuals