Transfer Case Fluid Level Check (G1908026): Check
WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- Some variation in the illustrations may occur, but the essential information is always correct.
- Some components shown removed for clarity.
- Removal steps in this procedure may contain installation details.
-
WARNING: Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
- Refer to: ENGINE UNDERSHIELD
-
CAUTION: Make sure that the area around the component is clean and free of foreign material.NOTE: Discard the sealing washer.
-
CAUTION: Make sure that the area around the component is clean and free of foreign material.NOTE: Remove and discard the fill plug