Transfer Case Fluid Level Check (G1908026): Adjustment
WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- Some variation in the illustrations may occur, but the essential information is always correct.
- Some components shown removed for clarity.
- Removal steps in this procedure may contain installation details.
- Top-up the transfer case with recommended fluid, until the fluid is level with bottom of filler/level plug hole.
-
CAUTION: Make sure that a new sealing washer is installed.NOTE: Make sure that all the component mating faces are clean.
Torque : 8Nm
-
CAUTION: Make sure that the area around the component is clean and free of foreign material.
Renew Part: Transfer case fill plug Quantity : 1.
Torque : 25Nm
Torque : 25Nm
Torque : 45Nm
- Refer to: ENGINE UNDERSHIELD