DTC U2300-54: Central Configuration - Missing calibration: Action
WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- After updating the car configuration file, set the ignition to on and wait 30 seconds before clearing the DTCs.
- If this DTC is set, DO NOT replace any transmission components (for example, the transmission control module, the mechatronic or the gearbox). This DTC does not indicate a transmission issue
- Prioritized steps to perform:
- Using the Jaguar Land Rover approved diagnostic equipment, check and update the car configuration file as necessary. Clear the DTCs and retest
- Using the Jaguar Land Rover approved diagnostic equipment, check the gateway module for related DTCs and refer to the relevant DTC index