DTC B0075-2B: Second Row Right Seatbelt Pretensioner Deployment Control - Signal cross coupled: Action

WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: The airbag connector has a locking plunger (orange tab) which should only fully lock when the two connectors are securely mated, male to female. If the plunger can move to the locked position easily when not mated (ie: using reasonable pressure), then this indicates that the connector is damaged. Replace the wiring harness as necessary

Refer to the electrical circuit diagrams and check the rear right seatbelt retractor pretensioner circuit for short circuit to another restraints circuit