Selector Shaft Seal (G1868145): Installation

WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Install a new seal.

Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
- Using 307-509-3, install the selector shaft seal.
  Special Tool(s): 307-509-3
  
  Renew Part: Selector lever assembly Quantity: 1.
Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
- Torque : 12Nm
Refer to: ENGINE UNDERSHIELD