LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 222 (Automatic Transmission/Transaxle - RWD -- XE/(760)) >> Automatic Transmission/Transaxle - RWD (G1868372) >> Removal And Installation >> Input Shaft Seal (G1820947) >> Removal

Input Shaft Seal (G1820947): Removal

WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Be prepared to collect escaping fluids.
NOTE:
  • Removal steps in this procedure may contain installation details.
  • Some variation in the illustrations may occur, but the essential information is always correct.
  1. WARNING: Make sure to support the vehicle with axle stands.

    Raise and support the vehicle.

  2. Refer to: TRANSMISSION - INGENIUM I4 2.0L DIESEL Removal 

    Refer to: TRANSMISSION - V6 S/C 3.0L PETROL Removal 

  3. CAUTION: Be prepared to collect escaping fluids.
    G11291629Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Special Tool(s): 307-613 

  4. CAUTION:
    • Take extra care not to damage the edges of the component.
    • Discard the seal.
    G11298530Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Special Tool(s): 100-012, 100-012-01, 308-375 

scientia non olet · About LEMON Manuals