LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 222 (Automatic Transmission/Transaxle - RWD -- XE/(760)) >> Automatic Transmission/Transaxle - RWD (G1868372) >> Removal And Installation >> Input Shaft Seal (G1820947) >> Installation

Input Shaft Seal (G1820947): Installation

WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. CAUTION:
    • Install a new seal.
    • Care must be taken to avoid damage to the seal register and running surface.
    G11298531Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Special Tool(s): JLR-308-845 

    Renew Part: Transfer case input shaft oil seal  Quantity: 1. 

  2. G11291832Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Special Tool(s): 307-613 

  3. CAUTION: Make sure the torque converter is fully located into the oil pump drive.
    G11291833Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
  4. Refer to: TRANSMISSION - INGENIUM I4 2.0L DIESEL Installation 

    Refer to: TRANSMISSION - V6 S/C 3.0L PETROL Installation 

scientia non olet · About LEMON Manuals