Pinpoint Test C: Transmission Shift Quality
WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
- C1: DIAGNOSTIC TROUBLE CODE CHECK
- Using the JLR
approved diagnostic equipment, perform routine - Read DTC
. Check for DTC
in the following control module:
- GWM
Are there DTC in the above modules?
Yes : Refer to the relevant DTC index and perform the relevant corrective actions. Perform a road test and re-assess the quality of the gear shift. If the gear shift concern is still present GO to PINPOINT TEST F . If the gear shift concern has now been corrected return the vehicle to the customer.
No : GO to PINPOINT TEST F .
- Using the JLR
approved diagnostic equipment, perform routine - Read DTC
. Check for DTC
in the following control module:
| POSSIBLE CAUSE | CLUSTER OF DTC | SYSTEM/MODULE TO INVESTIGATE |
|---|---|---|
| GWM |
|
GWM |