LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 221 (Instrument Cluster -- XE/(760)) >> Instrument Cluster >> Removal And Installation >> Instrument Cluster >> Installation

Instrument Cluster: Installation

WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install reverse the removal procedure.
  2. CAUTION: Only applicable vehicles with software numbers K8D2-14C104-AC or L8B2-14C104-AC as detailed in removal step 2  .
    NOTE:
    • Only complete this step if a new instrument cluster is to be installed.
    • This step is only applicable to 19MY onward vehicles.
    • Non-NAS Markets only.
    • SRO must be claimed separately.

    Install a new RFA  .

    Refer to: REMOTE FUNCTION ACTUATOR

  3. Configure the instrument cluster and ignition keys using the diagnostic tool.

    General Equipment: Jaguar diagnostic equipment 

scientia non olet · About LEMON Manuals