Head Up Display - If Equipped

WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.

The Head Up Display Control Module (HUDCM) receives a permanent power supply via the Rear Junction Box (RJB). A High Speed (HS) CAN comfort systems bus connection allows the Head Up Display (HUD) to communicate with other modules such as the Instrument Cluster (IC).

The HUD is controlled from the message center menu.

When selected, the menu offers the following options:

Selecting the position of the display on the windscreen.
Selecting the brightness of the display.
Selecting which information is displayed on the HUD.

Control of the display brightness can be adjusted in 3 different ways:

As listed above, manually, from within the HUD selection of the 'Main Menu' in the message center.
If the vehicle lighting is switched on, the HUD display will adjust simultaneously with the manual adjustment of the IC dimmer.
Automatic brightness, controlled using data from the rain/light sensor.

For additional information, Refer to: INFORMATION AND MESSAGE CENTER - PROJECT 8

For additional information, Refer to: EXTERIOR LIGHTING

Prior to selecting the HUD windshield position the user should select their desired seating position. The steering wheel controls are used to set the horizontal position of the windshield display. Once set, the information can be saved in the seat memory control system, storing the selected preferences. For additional information, Refer to: SEATS - PROJECT 8