LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 220 (Automatic Transmission/Transaxle External Controls - Vehicles With: 8HP45 8-Speed Automatic Transmission AWD/8HP45 8-Speed Automatic Transmission RWD/8HP70 8 - Speed Automatic Transmission AWD -- XE/(760)) >> Automatic Transmission/Transaxle External Controls - Vehicles With: 8HP45 8-Speed Automatic Transmission AWD/8HP45 8-Speed Automatic Transmission RWD/8HP70 8-Speed Automatic Transmission AWD (G1862976) >> Removal And Installation >> Emergency Park Release Lever - INGENIUM I4 2.0L Petrol (G2028355) >> Installation

Emergency Park Release Lever - INGENIUM I4 2.0L Petrol (G2028355): Installation

WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. Attach the emergency park position release lever to the bracket.
  2. Install the emergency park position release lever.
  3. NOTE: If necessary, install new clips.

    Install the 2 clips.

    • Install the 2 bolts.

      Torque  : 11Nm 

    • Attach the emergency release cable.
  5. Install the air deflector.

    Refer to: ENGINE UNDERSHIELD

    • Install the clip.
    • Install the nut.

    Torque  : 12Nm 

  7. Install the engine cover.

    Refer to: ENGINE COVER - INGENIUM I4 2.0L PETROL

scientia non olet · About LEMON Manuals