LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 220 (Automatic Transmission/Transaxle External Controls - Vehicles With: 8HP45 8-Speed Automatic Transmission AWD/8HP45 8-Speed Automatic Transmission RWD/8HP70 8 - Speed Automatic Transmission AWD -- XE/(760)) >> Automatic Transmission/Transaxle External Controls - Vehicles With: 8HP45 8-Speed Automatic Transmission AWD/8HP45 8-Speed Automatic Transmission RWD/8HP70 8-Speed Automatic Transmission AWD (G1862976) >> Description And Operation >> External Controls - Project 8 (G2231219) >> Overview

External Controls - Project 8 (G2231219): Overview

WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.

The external controls for the automatic transmission comprise a Transmission Control Switch (TCS), 2 paddle switches and an Emergency Park Release (EPR) assembly.

The TCS transmits driver transmission selections to the Transmission Control Module (TCM) on the High Speed (HS) Controller Area Network (CAN) powertrain systems bus. The steering wheel mounted paddle switches can be used to initiate gear changes, with the TCS in either the Drive (D) or Sport (S) position. This causes a change of operating mode from automatic gear selection to manual gear selection.

The EPR is used to put the transmission in Neutral (N) during vehicle recovery operations, when it is not possible to put the transmission in 'N' using the TCS.

scientia non olet · About LEMON Manuals