Fault Symptoms
WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
The following symptoms may be observed for the following input/output faults:
- Ground - loss of ground connection or short circuit - TCS will not function.
- HS CAN powertrain systems bus - loss of CAN - TCS will not function, TCM will operate in 'limp home' mode.
- 'P'/'N' signal - output open circuit or short circuit - starter motor may not crank or a delay in engine cranking.
- Ignition input - loss of ignition input or short circuit - TCS will not function.
- Permanent battery supply - loss of power supply or supply out of range (less than 9 V or more than 16 V) - TCM will not function.