Transmission Description - Project 8 (G2231217): Overview

WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.

The ZF 8HP70 transmission is an electronically controlled, hydraulically operated, 8 speed automatic unit.

A single unit known as the mechatronic valve block is located inside the transmission. The mechatronic valve block contains the following control components:

Hydraulic control elements
Electronic control elements
Transmission Control Module (TCM).

The ZF 8HP70 transmission has the following features:

Designed to be maintenance free.
Automatic Transmission Fluid (ATF) is 'fill for life'.
The torque converter features a controlled slip feature with electronically regulated control of lock-up, creating a smooth transition to the fully locked condition.
Shift programs controlled by the TCM.
Adaptive Shift Strategy (ASIS), to provide continuous adaptation of shift changes to suit the driving style of the driver, which can vary from sporting to economical.
Connected to the Powertrain Control Module (PCM) via the FlexRay systems bus for communications.
Default mode if major faults occur.
Diagnostics available from the TCM via the FlexRay systems bus.

The transmission selections are made using the linear Transmission Control Switch (TCS) in the floor console. For additional information, Refer to: EXTERNAL CONTROLS - PROJECT 8

On vehicles featured with the stop/start system, the 8HP70 automatic transmission is equipped with a Hydraulic Impulse Storage (HIS) device. The HIS device is used to make sure pressurized ATF is available to the shift elements as quickly as possible when the engine is started.