LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 217 (Suspension System - General Information -- XE/(760)) >> Suspension System - General Information (G2415967) >> Specifications >> Wheel Alignment Specification - Rear - Comfort - Vehicles With Rear Wheel Drive

Wheel Alignment Specification - Rear - Comfort - Vehicles With Rear Wheel Drive

WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Both tie-rods must be rotated by an equal amount.
NOTE: All figures are with vehicle at 'Showroom' ride height - full fluids, full tank of fuel, no occupants/luggage, tires inflated to normal pressures
ITEM UNITS LEFT RIGHT TOTAL/BALANCE
Camber    Nominal  Tolerance  Min/Max  Nominal  Tolerance  Min/Max  Nominal  Tolerance  Min/Max 
  Decimal degrees -0.89° ± 0.75° -1.64°/-0.14° -0.89° ± 0.75° -1.64°/-0.14° 0.0° ± 0.75° -0.75°/0.75°
  Degrees/Minutes -0°53' ± 0°45' -1°38'/-0°8' -0°53' ± 0°45' -1°38'/-0°8' 0°0' ± 0°45' -0°45'/0°45'
Toe    Nominal  Tolerance  Min/Max  Nominal  Tolerance  Min/Max  Nominal  Tolerance  Min/Max 
  Decimal degrees 0.07° ± 0.08° -0.01°/0.15° 0.07° ± 0.08° -0.01°/0.15° 0.14° ± 0.16° -0.02°/0.30°
  Degrees/Minutes 0°5' ± 0°5' 0°0'/0°10' 0°5' ± 0°5' 0°0'/0°10' 0°10' ± 0°10' 0°0'/0°20'
Thrust angle    Nominal  Tolerance  Min/Max  Nominal  Tolerance  Min/Max  Nominal  Tolerance  Min/Max 
  Decimal degrees - - - - - - 0.0° ± 0.06° -0.06°/0.06
  Degrees/Minutes - - - - - - 0°0' ± 0°4' -0°4'/0°4'