LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 217 (Suspension System - General Information -- XE/(760)) >> Suspension System - General Information (G2415967) >> Specifications >> Wheel Alignment Specification - Front - Vehicles With Increased Ground Clearance

Wheel Alignment Specification - Front - Vehicles With Increased Ground Clearance

WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Both tie-rods must be rotated by an equal amount.
NOTE: All figures are with vehicle at 'Showroom' ride height - full fluids, full tank of fuel, no occupants/luggage, tires inflated to normal pressures
ITEM UNITS LEFT RIGHT TOTAL/BALANCE
Camber    Nominal  Tolerance  Min/Max  Nominal  Tolerance  Min/Max  Nominal  Tolerance  Min/Max 
  Decimal degrees -0.35° ± 0.75° -1.10°/0.40° -0.35° ± 0.75° -1.10°/0.40° 0.0° ± 0.75° -0.75°/0.75°
  Degrees/Minutes -0°21' ± 0°45' -1°6'/0°24' -0°21' ± 0°45' -1°6'/0°24' 0°0' ± 0°45' -0°45'/0°45'
Castor    Nominal  Tolerance  Min/Max  Nominal  Tolerance  Min/Max  Nominal  Tolerance  Min/Max 
  Decimal degrees 7.09° ± 0.75° 6.34°/7.84° 7.09° ± 0.75° 6.34°/7.84° 0.0° ± 0.90° -0.90°/0.90°
  Degrees/Minutes 7°5' ± 0°45' 6°20'/7°50' 7°5' ± 0°45' 6°20'/7°50' 0°0' ± 0°54' -0°54'/0°54'
Toe    Nominal  Tolerance  Min/Max  Nominal  Tolerance  Min/Max  Nominal  Tolerance  Min/Max 
  Decimal degrees 0.15° 0.06° 0.9°/0.21° 0.15° 0.06° 0.9°/0.21° 0.30° ± 0.12° 0.18°/0.42°
  Degrees/Minutes 0°9' 0°4' 0°5'/0°13' 0°9' 0°4' 0°5'/0°13' 0°18' ± 0°8' 0°10'/0°26'