LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 217 (Suspension System - General Information -- XE/(760)) >> Suspension System - General Information (G2415967) >> Specifications >> Wheel Alignment Specification - Front - Sport - Vehicles With All Wheel Drive

Wheel Alignment Specification - Front - Sport - Vehicles With All Wheel Drive

WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Both tie-rods must be rotated by an equal amount.
NOTE: All figures are with vehicle at 'Showroom' ride height - full fluids, full tank of fuel, no occupants/luggage, tires inflated to normal pressures
ITEM UNITS LEFT RIGHT TOTAL/BALANCE
Camber    Nominal  Tolerance  Min/Max  Nominal  Tolerance  Min/Max  Nominal  Tolerance  Min/Max 
  Decimal degrees -0.41° ± 0.75° -1.16°/0.34° -0.41° ± 0.75° -1.16°/0.34° 0.0° ± 0.75° -0.75°/0.75°
  Degrees/Minutes -0°25' ± 0°45' -1°10'/0°20' -0°25' ± 0°45' -1°10'/0°20' 0°0' ± 0°45' -0°45'/0°45'
Castor    Nominal  Tolerance  Min/Max  Nominal  Tolerance  Min/Max  Nominal  Tolerance  Min/Max 
  Decimal degrees 7.36° ± 0.75° 6.61°/8.11° 7.36° ± 0.75° 6.61°/8.11° 0.0° ± 0.90° -0.90°/0.90°
  Degrees/Minutes 7°22' ± 0°45' 6°37'/8°7' 7°22' ± 0°45' 6°37'/8°7' 0°0' ± 0°54' -0°54'/0°54'
Toe    Nominal  Tolerance  Min/Max  Nominal  Tolerance  Min/Max  Nominal  Tolerance  Min/Max 
  Decimal degrees 0.13° 0.06° 0.7°/0.19° 0.13° 0.06° 0.7°/0.19° 0.26° ± 0.12° 0.14°/0.38°
  Degrees/Minutes 0°8' 0°4' 0°4'/0°12' 0°8' 0°4' 0°4'/0°12' 0°16' ± 0°8' 0°8'/0°24'