Torque Specification
WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATION
| DESCRIPTION |
STAGE 1 NM/LB-FT |
STAGE 2 |
STAGE 3 |
STAGE 4 |
| Upper arm to body retaining nuts |
60 Nm/44 lb-ft |
|
|
|
| Upper arm ball joint to knuckle retaining nut and bolt |
60 Nm/44 lb-ft |
|
|
|
| Knuckle to rear lower arm ball joint retaining nut |
185 Nm/136 lb-ft |
|
|
|
| Rear lower arm to subframe retaining nut and bolt |
100 Nm/174 lb-ft |
180 degrees |
|
|
| Front lower arm to subframe retaining nut and bolt |
140 Nm/103.3 lb-ft |
240 degrees |
|
|
| Front lower arm to rear lower arm retaining nut and bolt |
60 Nm/44 lb-ft |
135 degrees |
|
|
| Stabilizer bar to subframe retaining bolts |
60 Nm/44 lb-ft |
|
|
|
| Stabilizer bar link upper fixing RWD |
48 Nm/35 lb-ft |
|
|
|
| Stabilizer bar link lower fixing RWD |
48 Nm/35 lb-ft |
|
|
|
| Stabilizer bar link upper fixing AWD |
60 Nm/44 lb-ft |
|
|
|
| Stabilizer bar link lower fixing AWD |
60 Nm/44 lb-ft |
|
|
|
| Shock absorber mounting to body retaining nuts |
27.5 Nm/21 lb-ft |
|
|
|
| Shock absorber to mounting retaining nut |
30 Nm/22 lb-ft |
|
|
|
| Shock absorber to rear lower arm retaining bolt RWD |
170 Nm/125 lb-ft |
|
|
|
| Shock absorber to yoke retaining nut and bolt AWD |
73 Nm/54 lb-ft |
|
|
|
| Yoke to rear lower arm bolt AWD |
70 Nm/52 lb-ft |
60 degrees |
|
|
| Wheel bearing to knuckle bolts RWD and AWD |
170 Nm/125 lb-ft |
Loosen 90 degrees |
90 Nm/66 lb-ft |
120 degrees |
| Halfshaft outer constant velocity joint retaining nut (Refer to removal and installation procedure for full tightening sequence) |
80 Nm/59 lb-ft |
60 degrees |
|
|