Wheel Knuckle - RWD (G1920894): Installation

WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

Torque : 9Nm
Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

Torque : 20Nm
CAUTION:
- Do not use air or power tools to remove or install the nut and bolt. Failure to follow this instruction may result in damage to the wheel knuckle.
- Do not pry or wedge open the clevis gap to release the upper ball joint from the wheel knuckle. Failure to follow this instruction may result in damage to the wheel knuckle.
- Install a new nut and bolt.
Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

Renew Part: Wheel knuckle nut Quantity: 1 .

Renew Part: Wheel knuckle bolt(s) Quantity: 1 .

Torque : 60Nm
CAUTION: Install a new nut.

Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

Renew Part: Front lower control arm nut Quantity: 1 .

Torque : 185Nm
CAUTION: Install a new nut.

Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

Renew Part: Tie-rod end nut Quantity: 1 .

Torque : 133Nm
CAUTION: Install new bolts.

Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

Renew Part: Brake caliper carrier bolt(s) Quantity: 2 .

Torque

Stage 1: 70Nm

Stage 2: 120°
Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

Torque : 9Nm
Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
Refer to: WHEEL AND TIRE