Wheel Knuckle - Project 8, AWD (G2246514): Part(S)
WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
| STEP | PART NAME | QUANTITY |
|---|---|---|
| Installation Step 1 | Wheel hub bearing(s) | 1 |
| Installation Step 13 | Wheel knuckle nut and bolt | 1 |
| Installation Step 14 | Front halfshaft nut | 1 |
| Installation Step 15 | Ball joint nut(s) and washer(s) | 1 |
| Installation Step 16 | Stabilizer bar link upper nut | 1 |
| Installation Step 17 | Tie-rod end nut | 1 |
| Installation Step 18 | Brake caliper housing bolt(s) | 2 |