LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 215 (Front Suspension -- XE/(760)) >> Front Suspension (G1920883) >> Removal And Installation >> Front Stabilizer Bar Bush (G1920896) >> Installation

Front Stabilizer Bar Bush (G1920896): Installation

WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the front stabilizer bar bush to the front stabilizer bar.
    • Reposition the front stabilizer bar bushes and install the front stabilizer bar brackets.
    • Install the 2 bolts.

      Torque  : 60Nm 

  3. Install the finishing panel.
  4. Install the wheel and tire.

    Refer to: WHEEL AND TIRE

  5. Repeat the procedure for the other side of the vehicle.
scientia non olet · About LEMON Manuals