Front Stabilizer Bar - V8 S/C 5.0L Petrol, Project 8 (G2247191): Installation

WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
- Install the stabilizer bar mounting brackets.
- Install the stabilizer bar bushes.
- Install the bolts and Install the 2 air deflectors.
  Torque : 5Nm
- Install the stabilizer bar assembly to the front subframe.
- Install the 4 stabilizer bar bracket bolts.
  Torque : 60Nm
Install the front subframe.
Refer to: FRONT SUBFRAME - V6 S/C 3.0L PETROL