Inspection And Assembly Requirements (G61412)
WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
- Check for leaks using ultraviolet (UV) Lamp. For additional information, refer to FLUORESCENT DYE LEAK DETECTION (G179002) in this article.
-
NOTE:
- Any time a hose or component connection leak is observed, the component and fitting must be separated, cleaned and a new O-ring fitted and lubricated with air conditioning compressor oil. For additional information, refer to SPECIFICATIONS in this article.
- When separating A/C joints, cap the open connections immediately. Do not leave open to atmosphere.
O-ring seal surfaces must be free of dirt, lint, burrs and scratches. The O-ring and connector should be lubricated with air conditioning compressor oil. For additional information, refer to SPECIFICATIONS in this article.