LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 211 (Electronic Engine Controls - INGENIUM I4 2.0L Diesel -- XE/(760)) >> Electronic Engine Controls - INGENIUM I4 2.0L Diesel (G1817213) >> Removal And Installation >> Post DPF Exhaust Gas Temperature Sensor (G1851722) >> Installation

Post DPF Exhaust Gas Temperature Sensor (G1851722): Installation

WARNING: This page is about a different car, the 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. CAUTION:
    • If accidentally dropped or knocked install a new sensor.
    • Make sure the anti-seize compound meeting specification ESE-M12A4-A is applied only to the threaded section and does not contact the sensor body.

    Install the post Diesel Particulate Filter (DPF) exhaust gas temperature sensor.

    Torque  : 35Nm 

  2. Connect and secure the post DPF exhaust gas temperature sensor wiring harness.
  3. Install the engine cover.
scientia non olet · About LEMON Manuals