Mass Air Flow Sensor (G1796534): Installation
WARNING: This page is about a different car, the 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
-
CAUTION: Make sure that the mating faces are clean and free from foreign material.NOTE: Only install a new O-ring seal if it was found to be damaged during the removal steps.
- Install the Mass Air Flow (MAF) sensor.
- Install and tighten the 2 screws.
Torque : 2Nm
- Install the air cleaner.
Refer to: AIR CLEANER