LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 211 (Electronic Engine Controls - INGENIUM I4 2.0L Diesel -- XE/(760)) >> Electronic Engine Controls - INGENIUM I4 2.0L Diesel (G1817213) >> Removal And Installation >> Heated Oxygen Sensor (G1817215) >> Installation

Heated Oxygen Sensor (G1817215): Installation

WARNING: This page is about a different car, the 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. NOTE: If the original sensor is to be installed, apply lubricant meeting specification ESE-M12A4-A to the thread of the sensor.
    • Using the special tool install the Heated Oxygen Sensor (HO2S) LH

      Special Tool(s): JLR-303-1666 

      Torque  : 48Nm 

    • Connect the electrical connector.
  2. Install the engine cover.

    Refer to: ENGINE COVER - INGENIUM I4 2.0L DIESEL

scientia non olet · About LEMON Manuals