Exhaust Gas Temperature Sensor - INGENIUM I4 2.0L Diesel - Mid, Low Power (G1798849): Installation

WARNING: This page is about a different car, the 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:
- If accidentally dropped or knocked install a new sensor.
- Make sure the anti-seize compound is applied only to the thread and does not contact the sensor body.
NOTE: If the original sensor is to be installed, apply lubricant meeting specification ESE-M12A4-A to the thread of the sensor.

To install, reverse the removal procedure.